CURRICULUM VITAE

RAJESH MAHANI EMAIL ****************************
ANDHERI
MUMBAI SKYPE ID-rajeshmahani

CAREER OBJECTIVE

To obtain a challenging position in your organization to enhance my knowledge and skills in **e various
aspects of technical services as well as in **e corporate skills.

INDUSTRIAL EXPERIENCE: - 10 Years

M/s TIME TECHNOPLAST LIMITED -MUMBAI(INDIA)
Duration: From 6

**

July to now.

Profile: Project, Maintenance ,servicing ,Programming of plc in Blow molding machines, steel drum
machines, winding machines, Injection Machines, Blow film machines .
Responsibilities:

✓

Program developing in PLC (Siemens)

✓

Programming in Drives (siemens, Allen Bradley, Omron)

✓

Programming of HMI(ktp-700)

✓

Modifying **e logic in ladder and Function block

✓

Maintenance of hydraulic section, modification as well as service

✓

Developing **e new logic to simplify **e operation

✓ 

Procurement of Materials and finalization wi** vendor.

✓ 

Safety and smoo** operation of electronic devices.

✓ 

Responsible for spare arrangement and delivery to our factories

✓ 

Panel inspection and checking of sequence

✓ 

Electrical and electronic modification

✓ 

Troubleshooting and fault finding in Machines across all over factories

✓ 

Monitoring **e temperature and pressure for smoo** operation. 

 
NC BEVRAGES LTD. (HIGHLAND WATER, UGANDA) 
Duration: From 10

**

 April to 1

st

 july-18. 

Profile: Maintenance of Filling, Blowing, Injection and **ermoforming section. 
Responsibilities: 

✓ 

Maintenance of injection, blowing section, filler section and **ermoforming section.

✓ 

Trouble shooting and new wiring of old machines.

✓ 

Maintenance of drives, plc, conveyors, fillers.

✓ 

Maintenance of blowing section, heaters, hydraulic, pneumatics section.

✓ 

Maintenance of servo system, compressor, Generators.

✓ 

Maintenance of ozone systems, U V section, tanks wi** all electrical section for water system.

✓ 

Maintenance of RO system.

 
 
NEO CREATIVE VISION TECHNOLOGIES PVT. LTD, GUJARAT. 
BARODA 

Duration: From 1

st

 September ****************** 

Profile: Training of PLC, SCADA, HMI, PROGRAMMING OF INVERTERS. 
 
Responsibilities: 

✓ 

Program developing in PLC

✓ 

Programming in scada (wander ware and wincc)

✓ 

Programming of HMI

✓ 

Developing **e logic in ladder and Function block

✓ 

Programming in Allenbradely 

✓ 

Developing **e new logic to simplify **e operation

✓ 

Communication of protocols

✓ 

Safety and smoo** operation of electronic devices.

 
Saudi Can Company Ltd. 
Jeddah, Saudi Arabia 
DURATION: From 9** January2016 to ************. 
Experience in Maintenance and project of plant wi** Machines. (Electrical /Electronic section) 
 
Job Profile: Senior maintenance engineer of plant. 
Handling of injection machines(NESTAL, BATTENFIELD,HUSKY,ARBURG,ENGEL) ,blow molding 
machines (KAUTEX,BBM, BEKUM ), Can making machines ( 1 liter to 4 liter wi** capping machines), 
Printing Machines, Robotic system ,Stretch blow molding machines(ASB MACHINES),

**ERMOFORMING MACHINES

 
Responsibilities: 

✓ 

Maintenance and Project of programming of PLC and SCADA, servo ac/dc drives.

✓ 

Maintenance of can making machines, Motors, conveyors, leak tester 

✓ 

Maintenance and project of hydraulic and pneumatic system. 

✓ 

Maintenance of vacuum section, Motors, pumps, chillers,compressor 

✓ 

Maintenance of injection machines, sequence and trouble shooting of electronic section. 

✓ 

Maintenance of servo motors, leak tester, heaters, **ermocouples. 

✓ 

Maintenance of printing machines, gas analyzer system, temperature controller. 

✓ 

Maintenance of blow molding machines, utility section. 

✓ 

Maintenance of pumps, chiller and utility section 

✓ 

New machine installing and commissioning

✓ 

Responsible for down time and iso system implementation 

✓ 

Responsible for spare arrangements

✓ 

Responsible for breakdown and analysis of plant 

✓ 

Maintenance of servo drives, power electronics, inverters 

✓ 

Maintenance of stretch blow molding machines 

✓ 

Maintenance and programming of PLC, Servo drives, ac / dc drives

✓ 

Correction and development wi** analysis. 

Savola Group of company (AL SHARQ PLSATICS LTD) 
Riyadh, Saudi. 
Duration :

From 1

ST 

June 2013 to till October 13**, 2015

Experience in maintenance & Project of plant wi** manufacturing machines( Electrical section) 
Job profile : 

Electrical Engineer maintenance and project section:-Maintenance of heavy motors

up to -2250 

KW,Handling of project, Handling of project and Extruder, printing and cutting sealing ,injection moulding,cnc 
section wi** TQM(Total quality management)(specially machines like HUSKY,BATTENFIELD ) up to 3000 ton. 
Handling of all injection molding maintenance wi** blow molding (BBM, MAGIC, BEKUM,KAUTEX) and blow 
film
Machines (W@H, ALPINE, REFIENHAUSER, MIRAFLEX, H@S, LEMO) wi** slitters And SML(SMILE) 

Responsibilities:

✓ 

Maintenance of PLC and SCADA 

✓ 

Maintenance of VFD, relays, compressor, HT & LT components, transformer, circuit breaker and all 
types of pneumatic and hydraulic panels.

✓ 

Maintenance of all types of heavy motors and automation-based machines

✓ 

Handling panel designing and troubleshooting of machines and HT & LT components 

✓ 

Handling of PLC program developing of ABB, SIEMENS (S7300, S7400), ALLENBRADELY, 
MITSHUBISHI and B&R wi** proper arranging of spare parts, RCA and preventive maintenance.

✓ 

Handling of trouble shooting in PLC, DRIVES and control circuits, Temperature controllers, heaters. 

✓ 

Handling of projects and maintenance in oil section, instrumentation, pressure study wi** pumps.

✓ 

Responsible for downtime and cost saving of plant wi** safety and all documentation.

 
Apollo Tyres Ltd. 
Vadodara, Gujarat. 

Duration

: 1

st

 January 2013 to May.

Experience in maintenance & Project of plant wi** Machines (Electrical Electronic section). 

Job Profile: Electrical Executive (E-2) Maintenance & Project section:-Maintenance of Banbury section 

heavy motors up to -2250 KW,Handling of project, Handling of project and automation sections wi** 
TQM(Total quality management) 

Responsibilities:

✓ 

Maintenance of PLC and SCADA machines

✓ 

Maintenance of VFD, relays, compressor, HT & LT components, transformer, circuit breaker and all 
types of pneumatic and hydraulic panels.

✓ 

Maintenance of all types of heavy motors and generators.

✓ 

Handling panel designing and troubleshooting of machines and HT & LT components 

✓ 

Handling of PLC program developing of ABB, SIEMENS .

 
PMT MACHINES LTD, HALOL, GUJRAT.

Duration

: June 2011 to 1

st

 January 2013.

Experience in maintenance & Project of plant wi** Machines (Electrical /Electronic section). 

Job Profile : Maintenance & Production engineer (installation and commissioning of Instrumentation & 

Automation),Handling of panel designing, commissioning of control panels and dealing wi** customer 
requirement.Maintaince of all electrical equipments (transformer, circuit breakers,DG sets and all type of
HT and LT panels, breakers, PLC, CNC, Hydraulic, Pneumatic Section).Trouble shooting and fault finding. 

Responsibilities:

✓ 

Maintenance of PLC and CNC machines

✓ 

Knowledge of panel designing and auto CAD 2010.

✓ 

Maintenance of VFD, relays, DG sets, compressor, HT & LT components, transformer, circuit 
breaker and all types of pneumatic and hydraulic panels.

✓ 

Knowledge of SCADA, PLC and HMI wi** communication

✓ 

Manufacturing of CNC surface grinding machines .

Kuesters Calico Machinery Limited Baroda. A JV between Eduard Kuesters machinefabrik Gmbh & Calico 
engineers,Mumbai manufacturing wet processing machinery used in textile industry and coating,Laminating 
and rotogravuse machinery used in flexible industry (non textile) under expertise of polytype,Switzerland. 

Duration

: september-***************** 

Job Profile: Maintenance and Project Engineer 

✓ 

Handling various Ac drives, wiring, safety & control, fault & safety protections, remote and local 
operation, communication wi** PLC, installation &commissioning of drives i.e. Baldor, Mitsubishi, 
Allen Bradley and Networking and Data Acquisition of PLC to SCADA, can used various Protocol like 
Rs232, Rs485,Mitsubishi,Profibus,Modbus etc. 

✓ 

Wring of different Panels, ABB and Siemens plc and drives. 

✓ 

Machine wiring and erection wi** commissioning of machine at **e customer side. 

✓ 

Experience in dosing (groundfose German) regularly pretentive maintenance and productive 
maintenance and troubleshooting wi** a time period.

✓ 

Trouble shoot, repair, and maintain – plant protection equipment, lighting, power systems plant 
electrical distributions, systems. 

✓ 

Responsible for daily activities associated wi** electrical systems. 

✓ 

Experience in making panel design, , panel wiring etc. 

✓ 

Handling various Ac drives, wiring, safety & control, fault & safety protections, remote and local 
operation, communication wi** PLC, installation &commissioning of drives i.e. ABB, Siemens, Allen 
Bradley and Networking and Data Acquisition of PLC to SCADA, can used various Protocol like Rs232, 
RS485,ABB,Profibus,Modbus and programming. 

Essar Steel, Hazira(PCT India Pvt Ltd, 
Job Profile: Electrical Engineer (PROJECTS) 
Duration: August-**************** 

Responsibilities

:

✓ 

Deal wi** **e Calibration, Installation of Instruments (which includes Pressure Transducer, 
Differential Pressure Transducer and o**er instruments). 

✓ 

Project handling of circuit breaker, transformer, motors including utility. 

✓ 

Termination about panel box, loop checking, gliding, erection of instruments wi** support, 
control valve, hydro testing, study of pressure and instruments. 

✓ 

Also involved in process and instrumentation diagram, Location diagram, trouble shooting. 

✓ 

Worked on basic schematic of instruments which includes hydraulics room. 

✓ 

Worked in Compressor House. 

✓ 

Responsible for daily activities associated wi** electrical systems. 

✓ 

Handling of manpower 

INDUSTRIAL PROCESS TECHNOLOGY TRAINING 

Automation certified from Siemens India Bangalore 
Automation certified from NCVT (6 mon**s)(PLC , SCADA , HMI , DCS , AUTO CAD , 
PROGRAMMING OF DRIVES). 

ACADEMIC QUALIFICATION 

Exam Appeared 

Board/University 

Year of Passing 

Percentage 

B.E.( Electrical) 

Rajas**an University. 

2009 

72.00% 

12

**

 Std.(Science)

C.H.S.E

May 2002

45.00%

10

**

 Std. 

H.S.C 

March 1999 

80.00% 

PERSONAL DETAILS

Date of Bir** 

6** July 1984 

Gender 

Male 

E-mail 

************************* (mailto:*************************)

Languages known 

Gujarati, Hindi, English, Arabic. 

Nationality 

Indian 

Marital Status 

Unmarried 

Phone number 

Показать контакты  

Yours Obediently, 

Rajesh Mahani.